Finboxes – Dings – Pinholes – Crushes – Soft areas – Water ingression – Pads – Anti slip coating

Over time, most surfbords gets minor fractures along the stringer and in rails. Those fractures are natural wear/ageing and nothing can really be done to prevent this.

If you get a bigger fracture, quick repair can help prevent the board ending in the waste container.

Most repairs can be done quite quick and affordable and will keep your board performing well.

Normally I stock FCS and Futures boxes for fast repairs, but the epoxy will need a few days to cure.

Call me (+45 3110 6193) or write an inquiry if you need more information


Twintip boards

Loose inserts – Loose plugs – Rail damages – Bottom or stone contacts

Have I killed my board?

No – Generally not – If your board is broken in 2 or more maybe – It can be almost impossible to regain the original flex and feeling if the board core and laminate are badly damaged.
However, most damages can be repaired without compromizing the board strenght and flex.

Rail grinds, surface punctures, delaminating, scratches, damaged plugs and fin holes can easily destroy a good board if they are allowed to develop. When water enters the core, it will slowly desintegrate the board – And then nothing can be done.

If your board is damaged – Bring it to my workshop and get a qualified point of view and a repair offer.

Kite Surfboards

Crushed fin boxes – Loose fin boxes – Pinholes – Crushed rails – Soft spots – Wet core material

Most repairs are possible – Often only depending on the cost of a new board of same brand/type.
Modern kite-able surfboards are very strong – If they are damaged and repaired immediately, they will not suffer at all.

Directionals – Raceboards – Foilboards – Foils

Both the foil itself and the board carrying it can suffer damage from bottom, stones, beach and transportation. The boards can be repaired just the same way as any other surfboard.
The foils are a bit more complicated but they are also more expensive, making repairs even more affordable.



Please select in the submenu for details on different types of boards.

I do any kind of repair or modification on:

  • Surfboards
  • Windsurfers
  • Kiteboards
  • SUP boards
  • Foils
  • Canoes
  • Kayaks
  • Composite parts to cars, bikes, boats, RC cars, RC planes etc.

I work with carbon, aramide, fiber glass and epoxy.

Give me a call (+45 31106193) or write me to get more information.